reference-designs/ad9695_fmc: Add AD9695_FMC documentation #409
reference-designs/ad9695_fmc: Add AD9695_FMC documentation #409
Conversation
BCapota
added
help wanted
| @@ -0,0 +1,142 @@ | |||
| .. _ad9695 ebz: | |||
There was a problem hiding this comment.
| .. _ad9695 ebz: | |
| .. _ad9695-fmc: |
.. _ad9695-fmc user-guide:
.. _ad9695-fmc help:
| Block diagram | ||
| ------------------------------------------------------------------------------- | ||
|
|
||
| .. image:: images/ad9695_fmc_block_diagram.svg |
There was a problem hiding this comment.
This is the HDL block diagram. Replace it with this one https://www.analog.com/en/products/ad9695.html
| #. :adi:`AD-SYNCHRONA14-EBZ <AD-SYNCHRONA14-EBZ>` clock source board | ||
| #. Serial port module for the AD-SYNCHRONA14-EBZ serial interface | ||
| #. 20-pin GPIO ribbon cable for serial communication between the ZCU102 and | ||
| the AD-SYNCHRONA14-EBZ (connected pin-to-pin, all 20 pins) | ||
| #. 3× SMA 50Ω terminators for unused AD-SYNCHRONA14-EBZ output channels |
There was a problem hiding this comment.
We should mention that the use of Synchrona is optional.
The users can use a clock generator with multiple outputs. So mark them with a star or something like that, that Synchrona, the GPIO module, the cable, and the terminators are optional.
There was a problem hiding this comment.
I updated the documentation to clarify that Synchrona and the related components are optional and added a note about using a multiple outputs clock generator as an alternative. Thank you!
StancaPop
left a comment
StancaPop
left a comment
There was a problem hiding this comment.
Looks good to me. Needs technical review from @IuliaCMoldovan.
Signed-off-by: Capota Bianca <bianca-ramona.capota@analog.com>
Signed-off-by: Capota Bianca <bianca-ramona.capota@analog.com>
4 participants
Type
Checklist
make htmloradoc serve: